SH36/19
A stunning shower for use by swimming pools, hot tubs or indoor bathrooms and wet rooms.
Polished Marine grade 316 stainless steel is the highest grade available on the commercial market and recommended for coastal areas. However please note, even with 316 grade if you are in a coastal area, some degree of maintenance is required to regularly wash off the salt content and prevent rust spots occuring.
Polished stainless steel is recommended in coastal areas as the ultra smooth surface is the most resistant to salt sitting on the surface.
This simple but sturdy design packs a real design punch and you can choose from several options depending on your requirements;
- a single feed shower with simple on/off stop tap - for cold water or pre-mixed warm water
- a double feed shower (hot and cold water supply) with a simple lever mixer tap
- a double feed shower with mixer, diverter and hand held shower
PLEASE NOTE as with all outdoor taps and showers, isolate and drain water supply in cold winter months to avoid frozen water damaging internal tap valves. Leave taps in an open position whilst water is turned off. Failure to do this can result in internal cartridges splitting or in extreme cases can cause a split in the stainless steel. Cartridges can be purchased and replaced but damage to the steel would require a replacement body part to be purchased.
The supplier's warranty will not cover damage caused by frost
PLEASE NOTE - WE DO NOT RECOMMEND 304 OUTDOOR GRADE STAINLESS STEEL IN COASTAL AREAS as the salt content in the air will sit on the steel and cause rust spots to occur - which can be cleaned off but will need more regular maintenance.
Even with 316 marine grade steel, the closer to the sea you are, there may still be rust spots that occur. They are purely cosmetic and will not damage the integrity of the steel. Regular rinsing down and cleaning with diluted vinegar solution or a preparatory stainless steel cleaner. (please use a soft cloth and no abrasive cloth or cleaner) will keep them at bay.
LEAD TIME 6-8 weeks as all showers are made to order in Europe
Please call the Ingarden team on 01732 463409 for more information or advice.